Tel:+86-531-88255563/88255580

Vicot gas fired absorption chiller V30



Unit introduction
This unit is a VICOT new energy chiller unit. It uses natural gas primary energy as the main driving energy source, ammonia as the refrigerant, and water as the absorbent.
The thermal cycle is performed in a sealed pipeline, which is welded and completely tight. It is factory tested and does not require any maintenance or coolant replenishment.
 
Features
Parameter
 
VGAC030-HT
Item Unit Standard cooling conditions
Nominal cooling capacity See note 1 kW 30
Water outlet temperature Minimum value °C 3
Water flow Std value m³/h 4
Nominal water pressure drop At nominal water flow kPa ≤40
Ambient temperature Maximum value °C 52
Minimum value °C 21
Rated thermal input power Std value KW 37.2
Rated natural gas flow Std value m³/h 4.0
Electrical Specifications
 
Power supply
Voltage V 380
Types   Three phase
frequency Hz 50
Electrical input power Std value kW 1.4
Installation data
Noise dB(A) 54
Gas accessories Type   Inner wire
Thread In Rc 1/2″
Water accessories Type   Inner wire
Thread In Rc 1 1/4″(DN32)
Dimension Length mm 2180
Width mm 1380
Height mm 2100
Weight Net weight kg 1200
 
Note:
1. Nominal cooling capacity: ambient dry bulb temperature 35 ℃, water outlet temperature 7 ℃; there will be certain change of cooling capacity in different ambient temperature;
2. Natural gas lower heating value 33.5 MJ;
3. Test conditions: natural gas static pressure 2.5kPa;
4. The noise value is the average value in 5 meters away from the unit;
5. The specification is subject to the value in rating label, and no prior notice before any change


Certificate